MULTITEST - Universal stand for testing and repairing of modern diesel injection systems for CR BOSCH, DENSO, DELPHI, SIEMENS.
MULTITEST - Universal stand for testing and repairing of modern diesel injection systems for CR BOSCH, DENSO, DELPHI, SIEMENS.
A universal stand of novelty for testing and repairing modern diesel injection systems for CR BOSCH, DENSO, DELPHI and SIEMENS. It is a universal solution for creating a workroom to repair fuel equipment. Has no competition in its class and can test not only CR injectors but also injection pumps, including the heavier series like HP-0 DENSO and CP-2 BOSCH..
The height of the drive of the stand is 125 mm (Bosch standard); allowing the installation of fasteners from stands of other brands, as well as CAM BOX for testing H / injectors and N / Sections in accordance with the manufacturer's test plans and BIP signal monitoring. Highly efficient freon cooler and a tank with a liquid quenching and heating device, with a capacity of 70 liters designed in for operating in hard mode.
The stand has a high-precision, thermostabilized measuring system which does not require precision parts and components, and is not afraid of the effects of pollution and other negative factors inherent in the stands of other manufacturers. There is also a separate liquid flow meter and a split rail with two controls and cooling. Temperature control is carried out for each drain channel from the injector and inside the tank.
Particular attention is paid to the operator’s hand space; 3 degrees of freedom when attaching injectors, allowing a more reliable solution for the attachment of varius connectors and pipes.
The device is a fully automatic machine, all processes are computerized and there is an extensive base of test plans. To carry out measurements in manual mode, a user-friendly menu is provided. The stands program also allows simultaneous monitoring of the valve response (BIP signal) and the timing of the acoustic injection signal. Automatic selection of the signal profile (including piezo) is provided when selecting the type of injector to be tested.
